Machine Listing and Capabilities
  


WIRE “EDM”
                        MITSUBISHI - FX30K SUBMERSIBLE WIRE-CUT EDM

                        NEW 2000
                        Max. Workpiece Size: 52.00 x 39.00 x 18.00
                        Max. Cut - up to 18.00 thk. Parts.
                        Max. Workpiece Weight: 4400 lbs.
                        Taper Machining
                        Auto re-thread
"CNC" GRINDER & GRINDERS
                        "CNC" - SHIGIYA - GPS - 40 - O.D. / I.D. CYLINDRICAL GRINDER
                        NEW 2010
                        Fanuc CNC Control
                        12.70 Diameter x 57.90 lg. Grinding Capacity
                        Input Increment - .00001
                        Swivel Workhead
                        Internal Grinding - 15.75 Dia. x 8.0 Deep
                        3 - Jaw Chuck
                        4 - Jaw Chuck
                        Steady Rests - 2 Point & 3 Point
                        BROWN & SHARPE MICROMASTER SURFACE GRINDER
                        10 x 30 Hydraulic  (.0002 Accuracy Over Entire Travels)
                        Serial Number:  523-1030-362         New: 1974
                        5 H.P. 14-1/2” Wheel Size                 (Rebuilt: 2003)
                        Fine Line Chuck Electromatic Neutrofier
                        NSK PLANET 550 PRECISION HIGH SPEED JIG GRINDER
                        65,000 RPM
                        (Specialty Grinding Attachment to CNC Machines)
                        DU MORE GRINDER - (TOOL POST)
                        O.D. / I.D. Grinding
                        Specialty Grinding
HONES

 
                        SUNNEN MBB166OK HONING MACHINE

                       NEW 1997
                      .060 - 6.00" Capacity
“CNC” - Lathes“CNC” - Lathes                      
                     
   “CNC” – MAZAK SLANT TURN NEXUS 550
                  NEW 2013
                   40" - Swing
                  120" - Between Centers
                   6.50" Thru Hole
                   60 H.P.

                       “CNC” - MAZAK QUICK TURN NEXUS 250

                        NEW 2003
                        14” - Swing
                        21” - Between Centers
                        3.00” – Hole thru spindle
                        20 H.P. Motor
 
                        “CNC” - MAZAK QUICK TURN 40 - UNIVERSAL 1500

                        NEW 1996    Serial No. 123031
                        20” - Swing
                        60” - Between Centers
                        3.15” – Hole thru spindle - 2.76” Max. Bar
                        40 H.P. Motor
 
                        “CNC” – MAZAK QUICK TURN 28N - UNIVERSAL
                        NEW 1992    Serial No. 104153
                        20” - Swing
                        40” - Between Centers
                        3.15” – Hole thru spindle - 2.76” Max. Bar
                        30 H.P. Motor
  
“CNC” - MILLS

                       CNC - MAZAK NEXUS VCN 410A HS2 VERTICAL MACHINING CENTER

                        NEW 2008
                        35.43 x 16.14 Table Size
                        40/30 H.P. - 15,000 RPM
                        30 Tool Magazine
                        Rapid Traverse 1968 IPM (X,Y,Z)
                        Mazatrol Matrix Control
                        Programmable 4th Axis
                       CNC - MAZAK V515 VERTICAL MACHINING CENTER

                        NEW 1998
                        51.18 x 21.65 Table Size
                        25 H.P.  25 – 6000 RPM
                        30 Tool Magazine
                        Rapid Traverse 1023 IPM (X,Y)
                        Mazatrol M Plus Control
                        Programmable 4th Axis
 
                        “CNC” - MAZAK V414 VERTICAL MACHINING CENTER

                        NEW 1994      Serial No. 109994
                        35.43 x 16.14 Table Size
                        10 H.P., 50 - 7000 RPM
                        24 Tool Magazine
                        Rapid Traverse 945 IPM (X,Y)
                        Mazatrol 32 - Bit Interactive CNC Control
                        Programmable 4th Axis
"CNC" & "NC" HORIZONTAL BORING BARS

            
                        5” NEW GIDDINGS & LEWIS HORIZONTAL BORING BAR

                        Model PT 1500,  Serial No. 480-0062 (2007)  
                        Spindle Size: 5.118"
                        Spindle Taper: #50
                        Head Travel (Y): 82.67"
                        Table Travel (X): 118.00”
                        Saddle Travel (W): 59.06"
                        Spindle Travel (Z): 31.50”
                        Automatic (60) Tool Changer
                        Part Probe
                        Siemens 840D CNC Control
                        4” GIDDINGS & LEWIS TABLE TYPE HORIZONTAL BORING BAR

                        Model 65-E4-T,  Serial No. 400-44-64 (1964)  (Retrofit 2014 to CNC)
                        Siemens 840D SL CNC Control
                        Spindle Size: 4”
                        Spindle Taper: #50
                        Head Travel: 50”
                        Table Travel: 62”
                        Saddle Travel: 48”
 
                       4” GIDDINGS & LEWIS-FRASER HORIZONTAL BORING BAR

                        Model 65T4,  Serial No. 150-76367 (1967) (Rebuilt 1995)
                        Anilam 3-Axis “NC” Programmable Control w/ memory
                        Spindle Size: 4”
                        Spindle Taper: #50
                        Head Travel: 50”
                        Table Travel: 62”
                        Saddle Travel: 54”
                        Table Size: 36” x 74” w/ Outboard Supports


                        3” GIDDINGS & LEWIS HORIZONTAL BORING BAR
                        Model 330T,  Serial No. 6508 (1943)
                        Spindle Size:  3”
                        Spindle Taper: #5 Morse
                        Head Travel: 44”
                        Table Travel:  50”
                        Saddle Travel: 42”
                        3-Axis Mitutoyo Digital Read-out
 
ENGINE & TURRET LATHES

                        TOOLMEX/WAFUM ENGINE LATHE TUR630A - 25” x 120” / 5.50” Bore

                        Serial No. 48911 (New – 1990) (Rebuilt 2004)
                        Swing Over bed / Cross slide 24.8 / 14.9
                        Distance between centers: 120”
                        Spindle bore hole: 5.50”
                        Inch / Metric threading: 1/2-88 TPI/1.88mm/Rev.
                        Follow-rest:  3/8” - 4” Cap.  (2) Steady Rests:  3/8” - 14-1/2" Cap
                        Taper Attachments
                        2-Axis Mitutoyo Read-out
 
                        WARNER & SWASEY 2A HOLLOW HEXAGON TURRET LATHE – M3470

                        Serial No. 2159886
                        Swing Max: 21-1/2"
                        Max. Distance-End of spindle to hex turret face: 60-1/2"
                        Spindle Hole: 3-1/4"
                        Steady Rests: 10” Capability
                        3-Axis Anilam Digital Read-out
 
                        MONARCH SERIES 60 – 16” / 18 ½” X 54” CC HELICAL GEARED HEAD

                        TOOLMAKER’S LATHE, Serial No. 36552 (1953)
                        Actual Swing over bedways: 18-1/2"
                        Swing over Cross Slide: 10-1/2"
                        Distance between centers: 54”
                        Hole thru spindle: 1-9/16”
                        2-Axis Digital Read-out
 
 
                        HARDINGE PRECISION AUTO-THREADING & CHUCKING MACHINE (1971)

                        Model  HC-AT
                        Max. Swing:  9”
                        5C Collets, Step Collets
                        Precision machine for small parts – medium sized runs

VERTICAL & HORIZONTAL MILLS
 
                        KEARNEY & TRECKER HORIZONTAL MILLING MACHINE – Model H

                        9” x 46” Table
                        Knee Travel: 15”
                        Cross Travel: 10”
                        Longitudinal Travel: 28”
                        3-Axis Digital Read-out
 
                        SUPERMAX MODEL YCM – 16VS VERTICAL MILL

                        “NC” – Servo II Retrofit
                        Variable Speed Drive 60/4200 RPM
                        Table: 9” x 49”
                        Cross Travel: 16”
                        Longitudinal Travel: 35”
                        Vertical Travel: 20”
 
                       SUPERMAX MODEL YC - 1 ½” VS VERTICAL MILLS

                        “NC” - Servo II Retrofit
                        Variable Speed Drive 60/4200 RPM
                        Table: 9” x 42”
                        Cross Travel: 12”
                        Longitudinal Travel: 29 3/4"
                        Vertical Travel: 16”
 
                        SUPERMAX MODEL YC - 1 ½” VS VERTICAL MILLS
                        “NC” - Servo II Retrofit
                        Variable Speed Drive 60/4200 RPM
                        Table: 9” x 42”
                        Cross Travel: 12”
                        Longitudinal Travel: 29 3/4"
                        Vertical Travel:  16” 


SAWS - VERTICAL & HORIZONTAL
 
                        GROB-MODEL 4V-18 VERTICAL BAND SAW - Serial No. 3413 (1979)
                        40-5000 Variable Speeds
                        24” x 24” Table
                        Power Feed Unit
 
                        ELLIS 3000 MITRE SAW New 1999

                        Capacity: 13 1/2" Rounds at 90°
                                         19” Flats at 90°

                        ELLIS MOBILE MITRE BAND SAW – Model 1500

                        Capacity: 10” Round at 90°
                                         11” Flat at 90°

                        ELLIS MOBILE MITRE BAND SAW – Model 1500

                        Capacity: 10” Round at 90°

WELDING CAPABILITIES

                        TIG WELDING - Low Carbon Steel
                                                      Aluminum
                                                      Stainless Steel
                                                      Bronze & Brass

                        MIG (wirefeed) WELDING - Low Carbon Steel
                                                      Aluminum
                                                      Stainless Steel

 
                        ARC (stick) WELDING - Low Carbon Steel
                                                      Aluminum
                                                      Stainless Steel
                                                      Cast Iron

WELDERS

                        MILLER WELDER - Thunderbolt AC/DC & all accessories
 
                        MILLERMATIC 200 - Wirefeed Welder/Miller Spoolmatic Gun
 
                        MILLER - SYNCROWAVE 250 AC/DC - with TIG Attachment
 
                        MILLER DELTAWELD 451 - 450 Amp Wirefeed Welder

HEAT TREAT FURNACE

                         LINDBERG - 12 x 18 x 12 - TREAT - ALL SERIES 2000
                                        Electric High Temperature Furnace
                         LINDBERG - 12 x 18 x 12 - TEMPERITE SERIES 2000
                                                   Electric Draw Furnace
                         BONAL - BLACK MAGIC - (DISTORTION CONTROL) - (NEW 2010)
                                        Vibratory Stress Relieve Machine
                                        18 x 36 Table Size
                                        300 lb. Part Capacity


SANDBLASTER
 
                         GAMM 36 x 48 – Production Pressure Blast Cabinet
                         GAMM 36 x 36P – DC4 Production Pressure Blast Cabinet
 
INSPECTION EQUIPMENT
(partial listing)
 
                        * OPTICAL COMPARATOR - Scherr - Tumico 16" High Precision 
                                         (New 2012)  (Accuracy to .00005 50 Millionths Using Fiber Optics Feature)
                        * "CMM" - MICRO-HITE 3D - Brown & Sharpe Coordinate Measuring Machine (Swiss Made)
                                         (New 2010)  (Accuracy - .0002)
                        * MICRO-HITE 900 Brown & Sharpe (Swiss Made)
                                         (New 2006)  (Accuracy - .0002)
                         * 48" x 96" Grade A - "Inspection Grade" Starrett Crystal
                                                 Pink Granite Surface Plate  (New 2005)
                        * 36” x 60” Grade A - “Inspection Grade” Starrett Crystal
                                                Pink Granite Surface Plate
                         * (2) 24" x 36" Grade B "Toolroom Grade"
                                         Black Granite Surface Plates
                         * MIKEMASTER 0 - 6" Standard
                         * MIKEMASTER 0 - 12" Standard - Certified Annually - *
                        * 14” x 14” x 2 Granite Precision Square
                        * .061 - 1.0000 Vermont Precision Pin Set
                        * 0-6” Mitutoyo Digital Micrometer Set
                        * Federal - Pocket Surf Profilemeter
                        * 24” Mitutoyo Digit Count - Height Stand
                        * 18” Cadillac Pla-chek Height Stand
                        * 81 pc. Precision Gage Block Set - Certified Annually - *
                        * 0 - 36” Micrometers
                        * 1” - 15” Lufkin Cylindrical Standards
                        * 5” Sine Bar
                        * Wilson Rockwell Hardness Tester
                        * Thread plug & ring gages for standard size UNC threads and metric threads
                        * 1 set - Van Keuren Co. Thread Pins
                        * Starrett Radius Gages to 1/2" R
                        * 0 - 1” Starrett Blade Micrometer
                        * 0 - 1” Mitutoyo Thread Pitch Micrometer
                        * 1 - 2” Mitutoyo Thread Pitch Micrometer
                        * 2 - 3” Mitutoyo Thread Pitch Micrometer                        
                        * 3 - 4” Mitutoyo Thread Pitch Micrometer
                        * 4 - 5” Mitutoyo Thread Pitch Micrometer
                        * 5 - 6” Mitutoyo Thread Pitch Micrometer
 
Many other miscellaneous items used in our quality control procedures

Accurate Machine Co., Inc.
1901 Hyland Avenue - P.O. Box 16
Kaukauna, WI 54130
(920) 766-7720 voice  (920) 766-9399 fax
Email: officestaff@accuratemachine.net

For Additional Information, please contact Rick Krause (920) 766-7720
For Immediate Quotations, please contact Jim Effa or Mike Ebben
Updated: 08/13/2014